PU-Glue 1174, for total glue down of products made of rubber granules
Art.-Nr.: 94PU1001174
- Unit: 1,1 kg bottles
- Amounts needed: App. 400 gr. for full glue down of 1 m²
- Colour: milky
- Min. temperature of use: 10 degrees celsius
Viscosity: freely flowing in warmer conditions – thicker in cold conditions
Characteristics: Moisture curing Polyurethane Glue (1 component) for gluing of rubber granule tiles and safety-elements on bound sub grounds (cement, asphalt, …) or for side to side gluing of such products.
Suitable for gluing of porous Rubber-Tiles and safety elements. Do not spill glue on product – remove immediately using a soft cloth. Dried glue turns yellow and is very hard to remove.
Pay attention to our installation guidelines.
Similar Products:
Safety Tile GRTR, 1 x 1 m
45, 60 or 80 mm, fallheight up to 2,40m
made of SBR rubber
Safety Tile STE GR, 1 x 1 m
45, 60 or 80 mm, fallheight up to 2,40m
made of EPDM rubber topping
Safety Tile System SYS
Combination safety tile / shockpad
fallheight up to 3,0 m