Places of use
Benefits
|
paddock, stall, roundpen, wash rack
up to 80% less beding needed, water-permeable, non-slip, minimized injury risk, noise reduction,
soft to the joints
|
Strength
Weight
Dimensions
Material
Standard Colours
Surface
Underside
|
| HT42 |
HT60 |
|
42 mm
33 kg
|
60 mm
44 kg
|
|
1010 x 1010 mm
Polyurethane bound rubber granules
Redbrown or Black-mixcoloured
Flat
„Feet-Structure“, similar to the design of an egg-carton
|
| Water-permeable |
Yes. Urine and water are able to drain through the hundreds of canals in the mat.
|
| Requirements |
Bound subground (e.g. asphalt, cement, …), slope of min. 3%, any sort of drainage
|
| Cleaning-interval |
Depending on the amount of dirt on and especially under the mats, they need to be cleaned in regular intervals (at least twice a year from both sides). Remove all lose dirt under the mats and let a fair amount of water soak through the mats using a garden hose or a high pressure cleaner. Put the cleaner to medium strength only. Allow some hours for drying afterwards.
|
Installation/
Assembling |
The mats are installed lose in stalls - the weight of the mats and the walls will hold the mats in place. Mats can be cut with a hand held utility knife or better with a fret-saw. Due to the possible change in dimension ( due to change in temperature and humidity) cutting may be necessary after some time.
|
|
Tolerances and note about material |
Tolerances in thickness: +/- 2 mm, Tolerances in measurement: +/- 2 %. Rubber-Tiles expand and shrink with changes in temperature and humidity. When the expanding leads to bending of the tiles they have to be shorted by some cm at 2 sides of the area (see separate installation sheet).
|
