| Places of use |
Gluing of porous Rubber-Tiles and safety elements. On porous, difficult grounds: use Primer 1103 first. |
Installation
|
Suitable for gluing of porous Rubber-Tiles and safety elements. Do not spill glue on product – remove immediately using a soft cloth. Dried glue turns yellow and is very hard to remove.
Pay attention to our installation sheet.
|
| |
|
Format
Colour
Needed tools
|
1,1 kg bottles
Milky-cloudy
No tools are needed to use „1174“. Directly use out of bottle by squeezing gently.
|
| Characteristics |
Moisture curing Polyurethane Glue for gluing of rubber granule tiles and safety-elements on bound sub grounds (cement, asphalt, …) or for side to side gluing of such products.
|
Min. Temperature for use
Viscosity
Precautions
|
10 Degrees Celsius
More liquid at higher, less liquid at lower temperatures
Use appropriate gloves. Safety-Data-Sheets are supplied upon request.
|
Similar / further Products
|
Due to its higher viscosity the glue SH100 is better suited for side-to-side gluing
|
| Materialhinweis |
Never to be used in connection with any kind moisture (e.g. rain, frost, fog, …) Not to be used at temperatures of less than 10 Degrees Celsius. Contains Diphenylmethan-4,4’Di-Isocyant. Use within 6 month – see bottle label. |
